Grand Caravan V6-4.0L (2008)
20. Position fore-aft crossmember in engine compartment and install mounting bolts (3, 4, 6). Tighten forward mounting bolt (6) to 113 Nm (83 ft.
lbs.). Tighten rearward mounting bolts (3, 4) at suspension crossmember (2) to 55 Nm (41 ft. lbs.).
21. Install front engine mount thru-bolt (4). Tighten bolt to 57 Nm (42 ft. lbs.).
22. Attach the stabilizer bar link (1) at each end of the stabilizer bar (3). At each link, install and tighten the nut (2) while holding the stabilizer bar
link lower stud stationary. Tighten the nuts to 88 Nm (65 ft. lbs.).
23. Install the hub nut (1) on the end of each halfshaft stub shaft (2). With aid of a helper applying the brakes to keep the front hub from turning,
tighten the hub nut to 160 Nm (118 ft. lbs.).
