dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Overhead Console|Page 10561 > < Front Overhead Console|Page 10559
Page 7
background image

5. Connect the electrical connector (4) to the rear bezel (5) and firmly snap into place.
6. Connect the electrical connector (2) to the front bezel (3) and firmly snap into place.
7. Connect the battery negative cable.

Sunroof Only - Second Row Overhead Console

SUNROOF ONLY - SECOND ROW OVERHEAD CONSOLE

1. Position the overhead console over the retaining slots in vehicle.
2. If equipped with DVD screen, connect the electrical connectors (1).
3. Firmly push on the overhead console (3) to seat the retaining clips to the roof.
4. Install the four screws (2) to the overhead console (3) (two in the front and two in the back).

5. Position bezel (3) in vehicle over the retaining slots in the roof.
6. Connect the electrical connector (2) to the rear HVAC control head.
7. Connect the electrical connectors to the lamps (1).
8. Firmly snap the overhead console bezel (3) into place until it is seated.
9. Connect the battery negative cable.

Installation

INSTALLATION

Front Overhead Console|Page 10561 > < Front Overhead Console|Page 10559