dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Headliner - Removal|Page 10572 > < Instrument Panel Glove Box - Removal|Page 10567
Page 1
background image

Headliner: Service and Repair
Headliner - Removal

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove both the left and right A-pillar trimSee: Trim Panel/Service and Repair/Pillar Trim/A-Pillar Trim Panel-Removal.
3. Remove both the left and right upper B-pillar trimSee: Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim.
4. Remove both the left and right upper C-pillar trimSee: Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim Panel-Removal.
5. Remove both the left and right upper D-pillar trimSee: Trim Panel/Service and Repair/Pillar Trim/D-Pillar Trim/Removal.
6. Remove the front overhead consoleSee: Console/Service and Repair/Front Overhead Console/Removal.
7. Remove the rear overhead console.See: Console/Service and Repair/Rear Overhead Console - Removal.
8. Remove both left and right sun visorsSee: Sun Visor/Service and Repair/Sun Visor - Removal.
9. Remove both left and right sun visor supportsSee: Sun Visor/Service and Repair/Sun Visor Support - Removal.

10. Disconnect the headliner wiring connector (3) at the A-pillar.
11. Remove the push pins (4) holding the headliner (2) in place.
12. Remove the headliner out the rear liftgate opening.

Headliner - Removal|Page 10572 > < Instrument Panel Glove Box - Removal|Page 10567