dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Electrical - Intermittent Driver Power Seat Functions|Page 10973 > < Electrical - Intermittent Driver Power Seat Functions|Page 10967
Page 1
background image

Memory Positioning Module: All Technical Service Bulletins
Electrical - Intermittent Driver Power Seat Functions

NUMBER: 08-006-08 REV. A

GROUP: Electrical

DATE: May 29, 2008

THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-006-08, DATED FEBRUARY 22, 2008, WHICH SHOULD BE
REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE AN UPDATED OVERVIEW,
REPAIR PROCEDURE AND LABOR TIME.

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 8.05 OR HIGHER FOR THIS BULLETIN.

StarMOBILE STANDALONE MODE OR StarMOBILE DESKTOP CLIENT MAY ALSO BE USED TO PERFORM THIS PROCEDURE.

SUBJECT:
Flash: Driver/Memory Seat or Driver Power Seat Functions Intermittently

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Memory Seat Module (MSMD) **and performing calibration on the MSMD with the
STARSCan. **

MODELS:

2008

(KK)

Liberty

2008

(RI)

Caravan/Town & Country

NOTE:

This bulletin applies to RT vehicles with sales code JT2 and KK vehicles with sales code LEW built prior to September 21, 2007 (0921XXMDH).

SYMPTOM/CONDITION:

The driver/memory seat and or driver power seat functions can become intermittently inoperative due to a Memory Seat Module software issue. A
software design change has been made to eliminated these intermittent conditions.

DIAGNOSIS:
Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify the driver power seat system is
functioning as designed. If DIG's are present record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the vehicle operator describes or experiences the Symptom/Condition, perform the Repair Procedure.

SPECIAL TOOLS / EQUIPMENT REQUIRED:

REPAIR PROCEDURE - USING THE INTERNET TO RETRIEVE THE FLASH FILE:

NOTE:

Before performing this Repair Procedure, the operating software in the StarSCAN(R) must be programmed with software release level 8.05 or
higher.

Electrical - Intermittent Driver Power Seat Functions|Page 10973 > < Electrical - Intermittent Driver Power Seat Functions|Page 10967