Grand Caravan V6-4.0L (2008)
7. Note the position of the two foam pieces inside the seat trim and remove them. A strip of velcro is sewn to the inside of the trim piece to retain the
foam in position (Fig. 5).
8. Remove and discard any velcro that may be left behind from the old foam piece.
9. Install the new foam pieces in each seat trim. Ensure that trim and foam is tucked down the side all the way during re-assembly.
10. Install the trim and foam assembly by pulling it down over the plastic base of each seat and pull seat buckle through slit in trim on each seat (Fig. 6).
11. Pull flap at the bottom through from the back of the seat.