Grand Caravan V6-4.0L (2008)
Power Seat Switch: Service and Repair
Power Seat Switch - Removal
Front Seat
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the seat cushion side shield (3),See: Seat Cushion/Service and Repair/Seat Cushion Side Shields - Removal.
3. Disconnect the power seat switch electrical harness connector (4).
4. Using a small flat bladed tool, gently release the four mounting tabs (1) that secure the power seat switch (2) and separate switch from side shield
(3).
Third Row
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick C-4755 or equivalent, disengage the third row power folding seat switch and bezel (4) from the upper D-Pillar trim panel (5).
3. Disconnect the switch electrical connector (3) and remove the switch from the vehicle.
Third Row - Leg Latch Actuator Position Switch
REMOVAL
NOTE: The procedure for replacing the seat leg latch position switch is the same for both the 60 and 40 third row power folding seats. The