Grand Caravan V6-4.0L (2008)
9. Position the seat bottom closeout (3) to the rear of the seat and install the push-pin retainers (1) that secure the two elastic straps (4) to the bottom
of the seat cushion frame (2).
10. Install the seat backSee: Seat Back/Service and Repair/Removal and Replacement/Seat Back - Installation.
11. Install the seat into the vehicleSee: Service and Repair/Removal and Replacement/Seat - Installation.
2nd Row Swivel
INSTALLATION
NOTE: Right seat shown in illustrations. Left seat similar.
1. Position the seat cushion cover (2) to the seat cushion (5) and engage the retaining strips (1) to the clips (3).
2. If equipped with heated seats, connect the seat cushion wire harness connector to the heated seat wire harness.
3. Install the seat cushion and cover onto the seat cushion frame (7).
4. Engage the J-hook retainer (3) that secures the seat cushion cover to the front of the seat cushion frame.
5. Engage the four J-hook retainers (2 and 4) that secure the seat cushion cover to the sides of the seat cushion frame.
6. Engage the J-hook retainer (8) that secures the seat cushion cover to the rear of the seat cushion frame.
7. Install the eight spacers (6) onto the mounting studs of the seat tracks (1 and 5).
