Grand Caravan V6-4.0L (2008)
Seat Heater: Service and Repair
Heated Seat Element - Removal
REMOVAL
CAUTION: On vehicles equipped with heated cloth seats the heating elements are an integral part of the seat foam and cover. If the heating
element is damaged or inoperative the complete seat cushion/cover or seat back/cover assembly must be replaced.
NOTE: Seat back heated seat element shown, seat cushions similar.
NOTE: Do not remove the factory installed heating elements from the seat or seat back cushions. The original element is permanently attached
and cannot be removed without permanent damage. The replacement heating element is designed to be applied directly on top of the factory
installed heating element.
1. Disconnect and isolate the battery negative cable.
2. For front row seats and 2nd row Fold 'N Go(R)seats disconnect the seat electrical connectors.
3. Remove the appropriate seat.
4. Remove the appropriate seat cushion or seat back trim cover (1).
5. Disconnect the inoperative heated seat cushion or seat back element electrical connectors.
6. Locate the wires leading from the inoperative heating element (2) and cut them off flush with the edge of the original heating element (3).
