Grand Caravan V6-4.0L (2008)
5. Remove the four screws on the lower seat back steel plate (Fig 1).
6. Remove the four mounting bolts on the outboard recliner (Fig 2)
7. Install the new motor side outboard recliner
8. Install the lower seat back steel plate.
9. Install the recliner cover.
10. Re-Install the seat. Refer to the detailed installation procedures in DealerCONNECT > TechCONNECT under: Service info > 23-Body > Seats,
Third Row, Power Folding > Seat > Installation.
NOTE:
Recliner End Of Travel Calibration routine found under Miscellaneous Functions must be performed after replacement using the scan tool. Ensure all
four power 3rd row seat leg latches are latched prior to performing this routine. This can be accomplished by manually pushing the seat down until
latches are closed.
