Grand Caravan V6-4.0L (2008)
1. Remove the seat from the vehicle and place it on a workbench.
2. Remove the seat side shieldsSee: Service and Repair/Removal and Replacement/Seat Side Shield - 2nd Row Swivel - Removal.
3. Remove the seat cushion side shieldsSee: Seat Cushion/Service and Repair/Seat Cushion Side Shields - Removal.
4. Remove the seat backSee: Seat Back/Service and Repair/Removal and Replacement/Seat Back - Removal.
5. If equipped with heated seats, remove the two screws (2) that secure the electrical contact (4) to the outboard seat riser (3) and disengage the wire
harness retainers (5) from the riser and the pivot mechanism (1).
NOTE: Outboard side of seat shown. Inboard side similar. Illustration shown with seat back and hinges removed for clarity.
6. Remove the four nuts (4) that secure each seat track (2) to the pivot mechanism (3).
7. Remove the seat tracks and eight spacers (1) from the pivot mechanism.
8. Remove the eight spacers (6) from the mounting studs on the seat tracks (1 and 5).
9. Disengage the J-hook retainer (8) that secures the seat cushion cover to the rear of the seat cushion frame (7).
10. Disengage the four J-hook retainers (2 and 4) that secure the seat cushion cover to the sides of the seat cushion frame.
11. Disengage the J-hook retainer (3) that secures the seat cushion cover to the front of the seat cushion frame.
12. Remove the seat cushion and cover from the seat cushion frame.
13. If equipped with heated seats, disconnect the seat cushion wire harness connector located at the rear of the seat frame.
