dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body and Frame|Unibody > < Spoiler - Removal
Page 1
background image

Spoiler: Service and Repair
Spoiler - Installation

INSTALLATION

1. Install the rear spoiler to the vehicle.
2. Reconnect the washer hose.
3. Reconnect the brake lamp electrical connector.
4. Install the rear spoiler into position and push down to seat the pushpins (1) in place.
5. Install the 2 inner fastener nuts (2).

6. Install the 2 outer fastener nuts (2).
7. Install the upper trim panel (1) for the liftgate (3)See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and

Repair/Liftgate Trim Panel - Installation.

Body and Frame|Unibody > < Spoiler - Removal