Grand Caravan V6-4.0L (2008)
Brake Rotor/Disc: All Technical Service Bulletins
Brakes - Inadequate Front Brake Pad Life
NUMBER: 05-003-10 REV A
GROUP: Brakes
DATE: November 24, 2010
THIS BULLETIN SUPERSEDES SERVICE BULLETIN 05-003-10, DATED AUGUST 12, 2010, WHICH SHOULD BE REMOVED FROM YOUR
FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE A PART NUMBERS REVISION.
SUBJECT:
Brake Front Pad Lining Life
OVERVIEW:
This bulletin involves installing new brake linings and replacing both brake rotors as required.
MODELS:
2008
(RT)
Town & Country/Grand Caravan
NOTE:
This bulletin applies to vehicles equipped with brake sales code BRE and/or BRG only.
SYMPTOM/CONDITION:
Front brake pads may exhibit lining life complaints.
DIAGNOSIS:
1. Remove both front tire and wheel assemblies. Refer to the service information outlined in DealerCONNECT > TechCONNECT > Service
Information tab > 22 - Tires and Wheels > Removal
2. Using a Brake Lining Thickness Gauge or Brake Pad/Shoe Gauge, measure brake pad thickness.
3. Perform the repair procedure if the brake pad usable material measured at its thinnest point measures 4mm (0.1575 inches) or less.
4. If the brake pad assemblies do not require replacement, reassemble the vehicle. Refer to the service information outlined in DealerCONNECT >
TechCONNECT > Service Information tab > 22 - Tires and Wheels > Installation.
PARTS REQUIRED:
REPAIR PROCEDURE:
1. Remove the front brake pads. Refer to the service information outlined in DealerCONNECT > TechCONNECT > Service Information tab > 05 -
Brakes > 05 - Brakes, Base, Brake > Hydraulic/Mechanical > PADS, Brake, Front > Removal.
2. Remove any clips retaining the brake rotor to the wheel mounting studs.
3. Slide the brake rotor off the hub and bearing.
4. Clean the hub face to remove any dirt or corrosion where the rotor mounts.
5. Perform Step 2 through 4 on the opposite side of the vehicle.
