dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

05-006-08 > < Brakes - Inadequate Front Brake Pad Life
Page 2
background image

6. Install brake rotors (p/n CNM2X252AA) over the studs on the hub and bearing on both sides of the vehicle.

NOTE:

Rotor replacement is recommended when switching to this type brake pad. Standard brake service procedures apply thereafter.

7. Install new pads (p/n CNM2X250AA - Fixed Brake Pedal or p/n **68068762AA** - Adjustable Brake Pedal). Refer to the service information

outlined in DealerCONNECT > TechCONNECT > Service Information tab > 05 - Brakes > 05 - Brakes, Base, Brake > Hydraulic/Mechanical >
PADS, Brake, Front > Installation.

POLICY:
Reimbursable within the provisions of the warranty.

U.S. dealers, please refer to Warranty Bulletin D-10-19 dated August, 2010 for additional information in regards to the Extended Warranty X25.
Canadian dealers, please refer to Service Administration Bulletin 2010-13 for additional information regarding Extended Warranty X25.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:
This bulletin is supplied as technical information only and is not an 
authorization for repair.

05-006-08 > < Brakes - Inadequate Front Brake Pad Life