Grand Caravan V6-4.0L (2008)
CAUTION: The brake tubes must be routed to the correct ports. Improper routing can lead to degraded or undesirable system performance
including external brake fluid leaks.
-
(1) Master Cylinder Secondary
-
(2) Front Left
-
(3) Front Right
-
(4) Master Cylinder Primary
-
(5) Rear Left
-
(6) Rear Right
3. Install the four chassis brake tubes (2, 3, 5, 6) brake tubes at the ICU hydraulic control unit (7). Tighten the tube nuts to 14 Nm (120 in. lbs.).
4. Install the primary (4) and secondary (1) brake tubes at the ICU hydraulic control unit (7). Tighten the tube nuts to 14 Nm (120 in. lbs.).Â
5. Remove brake pedal holding tool.
6. Connect negative battery cable to battery post.
