Grand Caravan V6-4.0L (2008)
Rocker Arm Assembly: Description and Operation
Description - Rocker Arm Shafts
DESCRIPTION - ROCKER ARM SHAFTS
The rocker arm shafts are tubular steel and are supported by several forged aluminum alloy pedestals, which are fastened to the cylinder head. Four
shafts are used, one for each intake and exhaust rocker arm bank on each cylinder head. The shafts are hollow to provide a duct for lubricating oil flow
from the cylinder head to the valve mechanisms. One hollow dowel per pedestal is used to locate the pedestal to the cylinder head, orient the exhaust
rocker shaft, and serve as a cam bearing oil feed passage.
