Grand Caravan V6-4.0L (2008)
Camshaft Oil Seal: Service and Repair
Installation
INSTALLATION
RIGHT CYLINDER HEAD
1. Position the camshaft seal into the cylinder head.
2. Using special tool MD-998306 tap the seal into place.
3. Apply light coat of clean engine oil to the camshaft oil seal lip and Special Tool 6788 Seal Protector Sleeve.
4. Install oil seal Special Tool 6788 Seal Protector Sleeve onto the camshaft.
5. Slide the camshaft forward, inserting the seal protector through the camshaft seal until the camshaft seats.
6. Remove Special Tool 6788 from the camshaft.
7. Install the camshaft thrust plate with new gasket, to the rear of the cylinder head.
8. Install camshaft sprocket and timing beltSee: Timing Components/Timing Belt/Service and Repair/Removal and Replacement/Timing Belt &
Sprockets - Installation.
LEFT CYLINDER HEAD
