Grand Caravan V6-4.0L (2008)
Hose/Line HVAC: Description and Operation
DESCRIPTION
Models equipped with the rear heating-A/C system use metal lines attached to the vehicle underbody to carry refrigerant and engine coolant to and from
the rear A/C evaporator and heater core. The underbody A/C lines (2) are connected to the front A/C suction and liquid lines and to the rear A/C
expansion valve using nut type fittings (4) and O-ring seals. The underbody heater lines (1) are connected to the front heater hoses using spring type
clamps and the rear heater core using quick connect type fittings (3). The underbody lines are retained to the vehicle by five integral mounting brackets
(5).
NOTE: Replacement of the refrigerant line O-ring seals is required anytime an underbody refrigerant line is disconnected. Failure to replace
the rubber O-ring seals may result in a refrigerant system leak.
The underbody lines have no serviceable parts except for the refrigerant line rubber O-ring seals. The O-ring seals used on the refrigerant line
connections are made from a special type of rubber not affected by R-134a refrigerant. The O-ring seals must be replaced whenever the underbody
refrigerant lines are disconnected.
The underbody lines cannot be repaired and must be replaced if leaking or damaged.
