Grand Caravan V6-4.0L (2008)
6. Loosely install the bolt (1) that secures the driver side of the HVAC air distribution housing (2) to the underside of the instrument panel support
(3).
7. Loosely install the bolt (1) that secures the HVAC housing (2) to the front of the instrument panel support (3).
8. Tighten all of the bolts that secure the HVAC housing to the instrument panel support to 3 Nm (27 in. lbs.).
9. Install the two screws (1) that secure the defroster duct (2) to the top of the instrument panel cover (3). Tighten the screws to 2 Nm (17 in. lbs.).
10. Position the instrument panel and HVAC housing into the vehicle as an assembly. Make sure to align the condensate drain with the drain tube
located in the center of the floor panel and to fully engage the floor distribution ducts to the outlets in the bottom of the HVAC housing.
11. Install the instrument panel.
NOTE: Illustration shown with instrument panel removed for clarity.
