Grand Caravan V6-4.0L (2008)
Tail Light Bulb: Service and Repair
Tail Lamp Unit Bulbs - Removal
BULBS
There are a total of two bulbs in the tail lamp unit:
-
Back-Up Lamp (1) (Dodge).
-
Tail, Stop and Turn signal (2) (Dodge).
NOTE: On the Crasher model vehicles, the Tail, Stop and Turn signal lamp is in position (1) and the Back Up lamp is in position (2),
1. Remove the tail lamp unitSee: Service and Repair/Tail Lamp Unit - Removal
2. Disconnect the electrical connector.
3. Remove bulb socket from tail lamp unit by twisting a quarter turn counterclockwise.
4. Pull socket straight out of tail lamp unit.
5. Pull bulb from socket.