dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Steering - P/S Return Line Fluid Leak On Cold Start Up|Page 2030 > < Campaign - Power Steering Return Hose Replacement|Page 2024
Page 1
background image

Power Steering Line/Hose: All Technical Service Bulletins
Steering - P/S Return Line Fluid Leak On Cold Start Up

NUMBER: 19-002-11

GROUP: Steering

DATE: January 26, 2011

THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL 11-005. ALL APPLICABLE SOLD AND
UN-SOLD VIN's HAVE BEEN LOADED. TO VERIFY THAT THIS SERVICE ACTION IS APPLICABLE TO THE VEHICLE, USE VIP OR
PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY.

THIS BULLETIN SUPERSEDES SERVICE BULLETIN 19-001-10, DATED JANUARY 20, 2010, WHICH SHOULD BE REMOVED FROM
YOUR FILES.

SUBJECT:
Power Steering Return Lines

OVERVIEW:
This bulletin involves removing and replacing the gear to cooler power steering return hose with a kevlar braided return hose.

MODELS:

2008-2010

(RI)

Grand Caravan/ Town and Country

NOTE:

This bulletin applies to all vehicles built since June 18th, 2007 and before November 22nd, 2010 (MDH1122XX).

NOTE:

This only applies to vehicles which are exposed to extreme cold temperatures below -40°C(-40° F).

SYMPTOM/CONDITION:
Customer may experience leaks in power steering return line, at cold start up in temperatures below -40°C(-40°F) and increased steering efforts or noisy
power steering pump.

DIAGNOSIS:
If the above condition is present and determined, perform the Repair Procedure.

PARTS REQUIRED:

REPAIR PROCEDURE -

1. Raise the vehicle on a hoist. Refer to the detailed procedures available in DealerCONNECT > TechCONNECT under: Service Info > Hoisting >

Standard Procedure > Hoisting.

2. Remove the Gear to Cooler Power Steering Return Hose. Refer to the detailed removal procedures available in DealerCONNECT > TechCONNECT

under: Service Info > 19-Steering > Pump > HOSE, Power Steering, Return > Removal > Gear to Cooler.

3. Install the Gear to Cooler Power Steering Return Hose. Refer to the detailed removal procedures available in DealerCONNECT > TechCONNECT

under: Service Info > 19-Steering > Pump > HOSE, Power Steering, Return > Installation > Gear to Cooler.

Steering - P/S Return Line Fluid Leak On Cold Start Up|Page 2030 > < Campaign - Power Steering Return Hose Replacement|Page 2024