dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Oil Change Reminder Lamp|Description|Page 2213 > < Instruments - Vehicle Information Center Setup|Page 2210
Page 1
background image

Oil Change Reminder Lamp: Description and Operation
Description

DESCRIPTION

A change oil indicator is standard equipment on all instrument clusters. However, on vehicles manufactured for export markets except those equipped
with a 2.8 liter diesel engine and an optional diesel particulate filter, this indicator is electronically disabled. The change oil indication appears within the
fixed segment odometer Vacuum Fluorescent Display (VFD) unit on vehicles not equipped with an optional Electronic Vehicle Information Center
(EVIC). On vehicles equipped with the optional EVIC, the change oil indication in the odometer VFD is electronically suppressed so as not to duplicate
indications that are provided by the EVIC. The odometer VFD change oil indicator consists of cycling textual CHANGE  thenOIL  messages which
appear in place of the odometer/trip odometer information. The EVIC change oil indicator consists of a textual Oil Change Required  message that
appears within the EVIC VFD.

The odometer VFD unit is soldered onto the cluster electronic circuit board, and is visible through a window with a smoked clear lens located at the base
of the cluster overlay right gauge dial face (Dodge) or the tachometer dial face (Chrysler). The EVIC VFD unit is soldered onto the cluster electronic
circuit board, and is visible through a window with a smoked clear lens located at the base of the cluster overlay speedometer dial face. The dark lens
over either VFD prevents it from being clearly visible when it is not illuminated. The change oil indicator textual messages appear in the same blue-green
color and at the same lighting level as the other information displayed in the odometer or EVIC VFD unit when it is illuminated by the instrument cluster
electronic circuit board.

During daylight hours (exterior lamps are OFF) the odometer and EVIC VFD units are illuminated at full brightness for clear visibility. At night (exterior
lamps are ON), the VFD lighting level is adjusted with the other cluster illumination lamps using the panel lamps dimmer thumbwheel of the headlamp
switch on the instrument panel. However, a PARADE mode position of the thumbwheel allows the VFD unit to be illuminated at full brightness if the
exterior lamps are turned ON during daylight hours.

The change oil indicator is serviced as a unit with the odometer or EVIC VFD unit in the instrument cluster.

Oil Change Reminder Lamp|Description|Page 2213 > < Instruments - Vehicle Information Center Setup|Page 2210