Grand Caravan V6-4.0L (2008)
5. Attach wheel speed sensor routing bracket (3) to mounting flange (2) on strut assembly. Install and tighten screw (1) to 10 Nm (89 in. lbs.).
6. Clip wheel speed sensor connector and routing clip (3) to bracket (2) on frame rail.
7. Connect vehicle wiring harness (1) to wheel speed sensor connector.
8. Install brake shield (3) on knuckle (2). Install and tighten three mounting screws (1) to 8 Nm (71 in. lbs.).
9. Install brake rotor, then install disc brake caliper and adapter assembly.See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Installation
10. Verify that wheel speed sensor is routed properly, not allowing cable to come in contact with moving parts.
11. Install hub nut (1) on end of halfshaft stub shaft (2). With aid of a helper applying brakes to keep front hub from turning, tighten hub nut to 160
Nm (118 ft. lbs.).
