Grand Caravan V6-4.0L (2008)
Engine Control Module: Service and Repair
Powertrain Control Module - Installation
INSTALLATION
1. Install the powertrain control module (PCM) (3) and bolts (1) to bracket (4). Tighten the bolts to 4.5 Nm (40 in. lbs.).
2. Install the electrical connectors (2) to the PCM (3).
3. Install the left front wheelhouse splash shield,See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front
Wheelhouse Splash Shield - Removal.
4. Connect the negative battery cable, tighten the nut to 5 Nm (45 in. lbs.).
5. Using scan tool, program the all necessary information into the PCM,. See: Testing and Inspection/Programming and Relearning
