dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Line Coupler|Service and Repair|Page 4385 > < Fuel Line Coupler|Service and Repair
Page 2
background image

6. Perform fuel pressure release procedure.See: Fuel Filter/Fuel Pressure Release
7. Disconnect negative battery cable from battery.
8. Clean fitting of any foreign material before disassembly.
9. 2-Button Type Fitting:  This type of fitting (1) is equipped with a push-button located on each side of quick-connect fitting (2). Press on both

buttons simultaneously for removal. Special tools are not required for disconnection.

10. Pinch-Type Fitting:  This fitting (1) is equipped with two finger tabs (2). Pinch both tabs together while removing fitting. Special tools are not

required for disconnection.

11. Single-Tab Type Fitting:  This type of fitting (3) is equipped with a single pull tab (1). The tab is removable. After tab is removed, quick-connect

fitting can be separated from fuel system component. Special tools are not required for disconnection.

Fuel Line Coupler|Service and Repair|Page 4385 > < Fuel Line Coupler|Service and Repair