dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Pump Module - Removal|Page 4445 > < Fuel Gauge Sender|Locations|Page 4442
Page 1
background image

Fuel Gauge Sender: Service and Repair
Fuel Pump Module - Removal

REMOVAL

1. Remove fuel tank,See: Service and Repair/Fuel Tank - Removal.

2. Disconnect electrical connector (1) from fuel pump module (3).
3. Disconnect fuel line (2) quick connect from fuel pump module (3).

CAUTION: Clean the area around fuel pump module prior to removal. Make sure this area is free of dirt. Failure to clean fuel pump
area prior to removal may cause dirt to get into the fuel system causing damage to the fuel system and/or engine.

4. Clean the area around fuel pump module with suitable cleaner and dry with low pressure filtered compressed air.

5. Install fuel pump module lock ring tool 9340 (1) and turn counter-clockwise to remove the fuel pump module lock ring (2).
6. Remove the fuel pump module as an assembly from the fuel tank.

Fuel Pump Module - Removal|Page 4445 > < Fuel Gauge Sender|Locations|Page 4442