dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Ignition Coil - Removal|Page 4630 > < Capacitor-Ignition|Page 4627
Page 1
background image

Ignition Coil: Service and Repair
Ignition Coil - Removal

4.0L

1. Disconnect and isolate the negative battery cable at battery.
2. Remove intake manifold,See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake Manifold - Removal.

NOTE: Prior to removing coil, spray compressed air around coil top to make sure no dirt drops into the spark plug tube.

3. Disconnect electrical connector (1) from ignition coils (3).
4. Remove mounting bolt (2).
5. Remove the ignition coil assembly (3) by turning the assembly 1/2 turn and pulling straight up in a steady motion.

Ignition Coil - Removal|Page 4630 > < Capacitor-Ignition|Page 4627