dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Ignition Cable|Removal|Page 3453 > < Ignition Cable|Specifications
Page 1
background image

Ignition Cable: Service and Repair
Removal

REMOVAL

WARNING: Always turn the engine off and disconnect the battery prior to servicing the spark plug cables. Do not attempt to remove a spark
plug cable while the motor is running. Failure to follow these directions may result in serious or fatal injury.

Disconnect and isolate negative battery cable at battery.

Remove spark plug cable from coil first.

Always remove the spark plug cable by grasping the top of the spark plug insulator, turning the boot 1/2 turn and pulling straight up in a steady motion.

Ignition Cable|Removal|Page 3453 > < Ignition Cable|Specifications