Grand Caravan V6-4.0L (2008)
Seat Heater Switch: Service and Repair
Contact
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the 2nd row seats.
3.
CAUTION: The 2nd row floor trim ring may be damaged if excessively flexed or twisted. Take care to support the complete assembly
during removal and installation.
Remove the 2nd row floor trim ring (2).
a. Remove the retaining nut trim plugs (4).
b. Remove the retaining nuts (3).
c. Carefully remove the trim ring (2) from the vehicle.
4. Disconnect the seat contact electrical connector (4).
5. Using door trim panel tool C-4829 or equivalent, remove the wire harness routing clip (3) from the vehicle floor.
6. Remove the two retaining screws (2).
7. Remove the contact assembly (1) from the vehicle.
Installation
INSTALLATION
