Grand Caravan V6-4.0L (2008)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor - Installation
INSTALLATION
1. Apply bearing grease (supplied with part) to sensor head shaft and O-ring.
CAUTION: Ensure that sensor mounting surface on bearing is clean before sensor installation.
2. Push wheel speed sensor (2) head into mounting hole in hub and bearing (3) and align mounting screw hole.
3. Install NEW mounting screw (1). Tighten mounting screw to 6 Nm (55 in. lbs.).
4. Attach wheel speed sensor routing bracket (2) to knuckle (1). Install and tighten screw (3) to 8 Nm (71 in. lbs.).
5. Attach wheel speed sensor routing bracket (3) to mounting flange (2) on strut assembly. Install and tighten screw (1) to 10 Nm (89 in. lbs.).
