Grand Caravan V6-4.0L (2008)
16. Remove screws and push-pins securing heat shield (1) over right side of steering gear (2). Remove heat shield.
17. Remove the rear engine mount.See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Service
and Repair/Engine Mount - Removal
18. Remove screws (3) securing power steering pressure hose routing clamp(s) (4.0L engine only uses one) to rear of crossmember.
19. Remove the screws (1) securing the stabilizer bushing retainers (2) to the crossmember.
20. Remove the two stabilizer bushing retainers (2).
21. Utilizing the slit cut into the cushions (bushings), remove the two cushions from the stabilizer bar.
22. Slowly rotate the stabilizer bar as necessary and remove it out through the driver side wheel opening.
23. Remove tube nut fastening return hose (5) to power steering gear (3). Remove return hose from gear port.
24. Remove tube nut fastening pressure hose (4) to power steering gear (3). Remove pressure hose from gear port.
