Grand Caravan V6-4.0L (2008)
CAUTION: Do not bump or hammer on the steering wheel or steering column shaft when removing the steering wheel.
6. Install an appropriate wheel puller with hooked legs (1) on the steering wheel over the steering shaftSee: .
CAUTION: Do not attempt to rotate the clockspring rotor once the steering wheel is removed. The clockspring must remain centered in
its travel to avoid overextending the clockspring inner parts, causing the clockspring to become inoperative. If removed and handled
properly using the correct procedures, it should remain in the "centered" position. If there is any question as to whether the clockspring
is in the "centered" position of travel, perform the clockspring centering procedure before installing the steering wheel. See: Restraint
Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Procedures
7. Holding the steering wheel firmly in the STRAIGHT-AHEAD position, release the steering wheel from the steering column shaft splines using the
wheel puller (1). Remove the steering wheel from the column.
8. Remove speed control switch from steering wheel.See: Cruise Control/Cruise Control Switch/Service and Repair/Removal
9. Remove remote audio switches from steering wheel.See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Remote Switch/Service and Repair/Removal
