Grand Caravan V6-4.0L (2008)
1. Center the axle beam on a transmission jack or equivalent standing at axle removal height.
2. Raise jack as necessary, then swing the axle trailing arms (2) upward aligning bushings with brackets (4) mounted on body.
3. At each trailing arm (2), install a thru-bolt (3) through mounting bracket (4) and bushing. Install a nut (1) on end of each thru-bolt. Do not tighten
at this time.
NOTE: Although both ends of the coil spring may appear identical, they are not. Be sure to place the end with the tag upward.
4. Install a lower isolator (3) and jounce bumper (2) on end of each coil spring.
5. Place coil spring (2) between body perch and axle at each end of axle. Be sure to place jounce bumper (2) at top.
6. Raise jack guiding the coil springs into mounted position. Continue to raise jack until shock absorber lower mounting bolts can be installed though
the axle brackets and shock absorber lower mounting eyes.
7. At each shock absorber, install lower mounting bolt (4) and nut (3). Do not tighten at this time.
