Grand Caravan V6-4.0L (2008)
13. Install wheel speed sensor routing clip (2) into hole in rear axle.
14. Install brake rotor (2) over hub and bearing (1).See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Brake Rotor - Installation
15. Install disc brake caliper and adapter bracket (1) over axle and rotor as an assembly.
16. Install two bolts (2) securing disc brake caliper and adapter bracket (1) to axle. Tighten mounting bolts to 100 Nm (74 ft. lbs.).
17. Position parking brake cable routing bracket to axle and install screw securing it in place. Tighten screw to 6 Nm (55 in. lbs.).
18. Position right rear parking brake cable (1) in front of axle (3) and install screws (2) securing cable in place. Tighten screws to 6 Nm (55 in. lbs.).
19. Position left rear parking brake cable routing clamp at left axle trailing arm. Tighten screw to 6 Nm (55 in. lbs.).
