Grand Caravan V6-4.0L (2008)
CAUTION: Do not remove ball joint stud from knuckle using a hammer. Damage to ALUMINUM knuckle, ball joint or control arm will
result.
NOTE: Lubricate Press (2), Special Tool C-4150A, screw-drive threads before use to ease use and promote tool longevity.
18. Place Press (2), Special Tool C-4150A, over ball joint stud and nut (4) as shown. Release ball joint stud from steering knuckle (1) by tightening
tool screw-drive. To ease Remover installation and use, it may help to rotate knuckle around so inside of knuckle faces outward.
19. Remove tool and nut from top of ball joint stud.
20. Remove steering knuckle from vehicle.
21. If hub and bearing needs to be transferred, remove four bolts attaching hub and bearing to knuckle, then remove hub and bearing.
