Grand Caravan V6-4.0L (2008)
Wiper Motor: Service and Repair
Wiper Module - Installation
INSTALLATION
1. Position the wiper module into the cowl.
2. Install the bolts that secure the wiper module to the dash. Tighten bolts to 8 Nm (70 in. lbs.).
3. Connect the wire harness connector to the wiper module.
4. Connect the positive lock on the wiper module wire connector.
5. Install the cowl coverSee: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Installation.
6. Insure the wiper module is in the park position by using the vehicle's wiper switch. Install the wiper arms and blades. Tighten nuts to 30 Nm (22 ft.
lbs.).
7. Connect the battery negative cable.
8. Close the hood.
