Grand Caravan AWD V6-201 3.3L (1992)
1. Thoroughly clean both adapter abutment rails. If there is any build-up of rust on the adapter abutment rails, remove it using a wire brush DO NOT
SAND RAILS.
2. Lubricate both adapter ways with a liberal amount of Mopar Multipurpose Lubricant, or equivalent.
Fig 8 Remove Or Install Anti-rattle Clip
3. Install the anti-rattle clip on the upper abutment of the caliper mounting adapter.
4. Remove the protective paper from the noise suppression gasket on both the inner and outer brake shoe assemblies (if equipped).
