dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Tires/Wheels - Smooth Road Vibration/Shake|Page 1394 > < Tires/Wheels - Smooth Road Vibration/Shake|Page 1392
Page 4
background image

Mark the tire AND wheel at the point of highest runout. Remove the tire from the wheel and check the wheel runouts (check BOTH sides of the wheel at
the bead seats (refer to Figure 2) with wheel mounted on an off car balancer.

SPECIFICATIONS:
Radial runout:

0.030 in. (0.762 mm) or LESS

Lateral runout:

0.030 in. (0.762 mm) or LESS

NOTE:

HUB MEASUREMENTS APPLY TO FRONT HUBS ONLY ON FRONT WHEEL DRIVE (FWD) VEHICLES AND TO FRONT AND REAR
HUBS ON ALL WHEEL DRIVE (AWD) VEHICLES.

Tires/Wheels - Smooth Road Vibration/Shake|Page 1394 > < Tires/Wheels - Smooth Road Vibration/Shake|Page 1392