Grand Caravan AWD V6-229 3.8L VIN L MFI (1997)
Speed Sensor Attaching Bolt
2. Install the wheel speed sensor head attaching bolt. Tighten the attaching bolt to a torque 12 Nm (105 inch lbs.).
3. Check the air gap between the face of the wheel speed sensor and the top surface of the tonewheel. Air gap must be less then the maximum
allowable tolerance of 1.2 mm (.047 inch).
Rear Speed Sensor Routing Brackets And Clips
4. Install the routing brackets attaching the speed sensor cable and brake tube to the rear axle. The rear wheel speed sensor cable should be routed
under the rear brake tube.
CAUTION: When installing rear wheel speed sensor cable in the routing clips on rear brake flex hose, be sure not to damage the routing clips.
Routing clips are molded onto the hose and will require replacement of the brake flex hose if damaged during installation of the wheel speed
sensor cable.
Speed Sensor Cable Attachment To Brake Flex Hose
5. Install speed sensor cable into routing clips on rear brake flex hose.
