dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Hazard Warning Lamps > < Front Door Ajar (VTSS Trigger) Switch|Page 9917
Page 1
background image

Fog/Driving Lamp Bulb: Service and Repair

Fog Lamp Bulb

REMOVAL

1. Remove fog lamp from vehicle.
2. Remove rear cover from fog lamp.
3. Disengage wire clip holding bulb in fog lamp.
4. Hinge wire retainer clip out of bulb removal path.
5. Pull bulb from lamp.
6. Disengage wire connector from fog lamp wire harness.

CAUTION:  Do not touch the glass of halogen bulbs with fingers or other oily surfaces, reduced bulb life will result.

INSTALLATION

1. Engage wire connector into fog lamp wire harness.
2. Insert bulb into lamp so index notches on bulb engage with bosses in lamp.
3. Hinge wire retainer clip over bulb base.
4. Engage wire clip to hold bulb into lamp.
5. Install rear cover on fog lamp.
6. Install fog lamp on vehicle.

Hazard Warning Lamps > < Front Door Ajar (VTSS Trigger) Switch|Page 9917