Grand Caravan AWD V6-229 3.8L VIN L MFI (1997)
Wheel Bearing: Service and Repair
Removal
REMOVAL
1. Set the parking brake. The parking brake is set to keep the hub/bearing and axle shaft from rotating when loosening the hub nut.
2. Raise vehicle. Vehicle is to be raised and supported on jackstands or on a frame contact type hoist.
3. Remove the wheel/tire.
Cotter Pin And Nut Retainer
4. Remove the cotter pin and nut retainer from the stub shaft of the outer C/V joint.
Spring Washer
5. Remove the spring washer from the stub shaft of the outer C/V joint.
Hub Nut And Washer
