Grand Caravan AWD V6-229 3.8L VIN L MFI (1997)
Clockspring Assembly / Spiral Cable: Service and Repair
Removal
WARNING: Disconnect and isolate the battery negative cable before beginning air-bag system component service procedures. This will
disable the airbag system. Failure to disconnect the battery could result in accidental air bag deployment and possible personal injury.
Allow system capacitor to discharge for two minutes before removing air bag components.
REMOVAL
1. Position steering wheel and front wheels straight ahead.
2. Release hood latch and open hood.
3. Disconnect and isolate battery negative cable. Allow at least two minutes for the reserve capacitor in the ACM to discharge.
4. Remove driver airbag from steering wheel.
5. Disconnect wire connectors from back of airbag module.
6. Remove steering wheel.
