Grand Caravan AWD V6-229 3.8L VIN L MFI (1997)
Wheel Bearing: Service and Repair
Installation
INSTALLATION
Hub/Bearing Removal And Installation
1. Install the hub/bearing on the stub shaft of outer C/V joint and into the end of the axle.
Hub/Bearing Mounting Bolts
2. In a progressive cries-cross pattern, tighten the 4 hub/bearing mounting bolts until the hub/ bearing is squarely seated against the axle. Then tighten
the hub/bearing mounting bolts to a torque of 129 Nm (95 ft. lbs.).
Speed Sensor Attaching Bolt
3. Install the wheel speed sensor on the hub/bearing and adapter. Install the wheel speed sensor attaching bolt. Tighten the wheel speed sensor
attaching bolt to a torque of 12 Nm (105 inch lbs).