Grand Caravan AWD V6-229 3.8L VIN L MFI (1997)
Spring Washer
10. Install the spring washer on the stub shaft of the outer C/V joint.
Cotter Pin And Nut Retainer
11. Install the nut retainer and cotter pin on the stub shaft of the outer C/V joint.
12. Install the wheel and tire assembly.
13. Tighten the wheel mounting stud nuts in proper sequence until all nuts are torqued to half specification. Then repeat the tightening sequence to the
full specified torque of 115-156 Nm (84-115 ft. lbs.).
14. Remove jackstands or lower hoist.
CAUTION: Before moving vehicle, pump the brake pedal several times to insure the vehicle has a firm brake pedal to adequately stop vehicle.