dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Radio/Stereo > < Diagram Information and Instructions|Page 7177
Page 1
background image

CD Changer: Service and Repair

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove screws holding CD changer.
3. Disconnect the wire connector from the back of the CD changer.

Fig.5 CD - Player

4. Remove the CD changer from the vehicle.

INSTALLATION

1. Reconnect the wire connector to the CD changer.
2. Insert the CD changer into the instrument panel.

NOTE:  Use care when inserting CD changer so that cable is not pinched or trapped against instrument panel.

3. Install screws holding CD changer.
4. Reconnect the battery negative cable.

Radio/Stereo > < Diagram Information and Instructions|Page 7177