Grand Caravan AWD V6-3.8L VIN L (2001)
14. Remove intake manifold bolts and remove the manifold (Fig. 133).
15. Cover the lower intake manifold with a suitable cover when servicing.
16. Clean and inspect the upper intake manifold.
CLEANING
1. Discard gasket(s).
2. Clean all sealing surfaces.
INSPECTION
Check manifold for:
-
Damage and cracks.
-
Mounting surface distortion by using a straightedge and thickness gauge.
INSTALLATION - 3.8L
1. If the following components were removed from manifold, install and tighten to specifications:
-
MAP sensor - 3.4 Nm (30 in. lbs.)
-
Throttle cable bracket - 12 Nm (105 in. lbs.)
2. Remove covering on lower intake manifold and clean surfaces.
3. Position the new intake manifold gasket on lower manifold.
