dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Evaporator Core|Service and Repair > < A/C - Temperature Difference Between Panel Vents|Page 6505
Page 1
background image

Evaporator Core: Description and Operation

EVAPORATOR - FRONT

The evaporator is located in the heater-A/C unit housing, behind the instrument panel. The evaporator is positioned in the heater-A/C housing so
that all air that enters the housing must pass over the fins of the evaporator before it is distributed through the system ducts and outlets. However,
air passing over the evaporator fins will only be conditioned when the compressor is engaged and circulating refrigerant through the evaporator
tubes. The heater-A/C unit housing must be removed from the vehicle to access the evaporator for service. The evaporator cannot be adjusted or
repaired and, if faulty or damaged, it must be replaced.

Refrigerant enters the evaporator from the expansion valve as a low-temperature, low-pressure liquid. As air flows over the fins of the evaporator,
the humidity in the air condenses on the fins, and the heat from the air is absorbed by the refrigerant. Heat absorption causes the refrigerant to boil
and vaporize. The refrigerant becomes a low-pressure gas when it leaves the evaporator.

EVAPORATOR - REAR

The rear evaporator is located in the rear heater-A/C unit housing, behind the right rear wheel house. The evaporator is positioned in the rear
heater-A/C housing so that all air that enters the housing must pass over the fins of the evaporator before it is distributed through the system ducts
and outlets. However, air passing over the evaporator fins will only be conditioned when the compressor is engaged and circulating refrigerant
through the evaporator tubes. The rear heater-A/C unit housing must be removed from the vehicle to access the evaporator for service. The
evaporator cannot be adjusted or repaired and, if faulty or damaged, it must be replaced.

Refrigerant enters the rear evaporator from the rear expansion valve as a low-temperature, low-pressure liquid. As air flows over the fins of the
evaporator, the humidity in the air condenses on the fins, and the heat from the air is absorbed by the refrigerant. Heat absorption causes the
refrigerant to boil and vaporize. The refrigerant becomes a low-pressure gas when it leaves the evaporator.

Evaporator Core|Service and Repair > < A/C - Temperature Difference Between Panel Vents|Page 6505