dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Audible Warning Device|Testing and Inspection > < Audible Warning Device|Service Precautions|Page 8664
Page 2
background image

lamp will appear without a chime if the vehicle is running and a door or the liftgate is opened. A chime will sound if the door or liftgate is still
open and the vehicle speed is greater than 4mph/6kph.

High-speed warning (GCC) 

The chime will sound, acting as a warning to the driver that the vehicle speed has exceed 75mph ± 2/120kph ± 3.

Warning Lamp Announcement
Low Fuel Lamp: 

The cluster will request a single chime after the indicator is illuminated.

Volt Lamp: 

The cluster will request a single chime after the indicator is illuminated.

Oil Pressure Lamp: 

The cluster will request a single chime after illuminating the indicator above 450rpm vehicle operation.

Headlight Out Lamp: 

The cluster will request a single chime after the indicator is illuminated.

Liftgate Ajar Lamp: 

The BCM determines when to chime for liftgate ajar.

Fasten Seat Belt Lamp: 

The BCM will request five chimes from the MIC when the ignition is turned to the unlock/run/start positions if the driver seat belt is not
buckled.

Check Engine Lamp: 

The cluster will request a single chime after the indicator is illuminated.

Low Washer Fluid Lamp: 

The cluster will request a single chime after the indicator is illuminated.

Engine Temperature Lamp: 

The cluster will request a single chime when the indicator is first illuminated at 252 °F/122C.

Other Chime ON Conditions
Bulb Check: 

The chime will sound three times during bulb check.

Programming of Additional Key Fob: 

A double cluster chime will sound, an  which signals that the program mode has been initiated. 

Programming for Rolling Door Locks: 

When the programming has been completed, a single tone from the chime system, will occur.

Audible Warning Device|Testing and Inspection > < Audible Warning Device|Service Precautions|Page 8664