Grand Caravan AWD V6-3.8L VIN L (2001)
Driver/Vehicle Information Display: Service and Repair
Electronic Vehicle Info Center Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove overhead console. Refer to Overhead Console Removal and Installation (Refer to OVERHEAD CONSOLE - REMOVAL).
3. Remove the ten screws holding the EVIC module in the overhead console.
4. Remove EVIC module from console assembly.
INSTALLATION
1. Position the EVIC module in the overhead console.
2. Install the ten screws holding the EVIC module in the overhead console.
3. Install the overhead console. Refer to Overhead Console Removal and Installation.
4. Connect the battery negative cable.
NOTE: If a new EVIC module has been installed, the compass will have to be calibrated and the variance set. Refer to Compass Variation
Adjustment and Compass Calibration for the procedures.