dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Seat Belt Reminder Lamp > < Instruments - Erratic Lamp Illumination on Non ABS Cars|Page 8856
Page 1
background image

Seat Belt Reminder Buzzer: Testing and Inspection

The seat belt chime will sound for 4 to 8 seconds, when the ignition is turned ON and the driver's seat belt is not buckled (seat belt switch is closed to
ground). This is a reminder to the driver to buckle the seat belt. The seat belt lamp is controlled by the ORC. The cluster will also bulb check the seat
belt warning lamp for 6 seconds. Buckling the driver's seat belt before the time out has expired will cause the chime to stop immediately. Chime rate: 38
to 62 chimes per minute 
 but the lamp will remain ON until 6 seconds have expired.

To test the seat belt warning system, the ignition switch must be in the OFF position for 1 minute before starting the test. Turn the ignition switch to the
ON position with the driver's seat belt not buckled. The seat belt warning lamp should light and the chime should sound 4 to 8 seconds.

Seat Belt Reminder Lamp > < Instruments - Erratic Lamp Illumination on Non ABS Cars|Page 8856