Grand Caravan AWD V6-3.8L VIN L (2001)
Rear Air Conditioning Lines
1. Before installation, replace all O-rings and gaskets. Coat all sealing surfaces with approved waxfree refrigerant oil.
2. Install A/C line into rear block with nylon wedge.
3. Install A/C lines into five underbody brackets.
4. Connect forward compression fittings.
5. Install bolt at sealing block to rear A/C housing.
6. Install ABS harness into clips.
7. Install heater hoses into underbody brackets.
8. Install lines into front hoses and install hose clamps.
9. Lower vehicle.
10. Evacuate and recharge system. Refer to: "Service and Repair" See: Heating and Air Conditioning/Service and Repair
11. Fill cooling system.
